pub struct Condition {
    pub ip_subnetworks: Vec<String>,
    pub device_policy: Option<DevicePolicy>,
    pub required_access_levels: Vec<String>,
    pub negate: bool,
    pub members: Vec<String>,
    pub regions: Vec<String>,
}
Expand description

A condition necessary for an AccessLevel to be granted. The Condition is an AND over its fields. So a Condition is true if: 1) the request IP is from one of the listed subnetworks AND 2) the originating device complies with the listed device policy AND 3) all listed access levels are granted AND 4) the request was sent at a time allowed by the DateTimeRestriction.

Fields§

§ip_subnetworks: Vec<String>

CIDR block IP subnetwork specification. May be IPv4 or IPv6. Note that for a CIDR IP address block, the specified IP address portion must be properly truncated (i.e. all the host bits must be zero) or the input is considered malformed. For example, “192.0.2.0/24” is accepted but “192.0.2.1/24” is not. Similarly, for IPv6, “2001:db8::/32” is accepted whereas “2001:db8::1/32” is not. The originating IP of a request must be in one of the listed subnets in order for this Condition to be true. If empty, all IP addresses are allowed.

§device_policy: Option<DevicePolicy>

Device specific restrictions, all restrictions must hold for the Condition to be true. If not specified, all devices are allowed.

§required_access_levels: Vec<String>

A list of other access levels defined in the same Policy, referenced by resource name. Referencing an AccessLevel which does not exist is an error. All access levels listed must be granted for the Condition to be true. Example: “accessPolicies/MY_POLICY/accessLevels/LEVEL_NAME"

§negate: bool

Whether to negate the Condition. If true, the Condition becomes a NAND over its non-empty fields, each field must be false for the Condition overall to be satisfied. Defaults to false.

§members: Vec<String>

The request must be made by one of the provided user or service accounts. Groups are not supported. Syntax: user:{emailid} serviceAccount:{emailid} If not specified, a request may come from any user.

§regions: Vec<String>

The request must originate from one of the provided countries/regions. Must be valid ISO 3166-1 alpha-2 codes.

Trait Implementations§

source§

impl Clone for Condition

source§

fn clone(&self) -> Condition

Returns a copy of the value. Read more
1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
source§

impl Debug for Condition

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
source§

impl Default for Condition

source§

fn default() -> Self

Returns the “default value” for a type. Read more
source§

impl Message for Condition

source§

fn encoded_len(&self) -> usize

Returns the encoded length of the message without a length delimiter.
source§

fn clear(&mut self)

Clears the message, resetting all fields to their default.
source§

fn encode(&self, buf: &mut impl BufMut) -> Result<(), EncodeError>
where Self: Sized,

Encodes the message to a buffer. Read more
source§

fn encode_to_vec(&self) -> Vec<u8>
where Self: Sized,

Encodes the message to a newly allocated buffer.
source§

fn encode_length_delimited( &self, buf: &mut impl BufMut, ) -> Result<(), EncodeError>
where Self: Sized,

Encodes the message with a length-delimiter to a buffer. Read more
source§

fn encode_length_delimited_to_vec(&self) -> Vec<u8>
where Self: Sized,

Encodes the message with a length-delimiter to a newly allocated buffer.
source§

fn decode(buf: impl Buf) -> Result<Self, DecodeError>
where Self: Default,

Decodes an instance of the message from a buffer. Read more
source§

fn decode_length_delimited(buf: impl Buf) -> Result<Self, DecodeError>
where Self: Default,

Decodes a length-delimited instance of the message from the buffer.
source§

fn merge(&mut self, buf: impl Buf) -> Result<(), DecodeError>
where Self: Sized,

Decodes an instance of the message from a buffer, and merges it into self. Read more
source§

fn merge_length_delimited(&mut self, buf: impl Buf) -> Result<(), DecodeError>
where Self: Sized,

Decodes a length-delimited instance of the message from buffer, and merges it into self.
source§

impl PartialEq for Condition

source§

fn eq(&self, other: &Condition) -> bool

This method tests for self and other values to be equal, and is used by ==.
1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
source§

impl StructuralPartialEq for Condition

Auto Trait Implementations§

Blanket Implementations§

source§

impl<T> Any for T
where T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for T
where T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

§

impl<T> FromRef<T> for T
where T: Clone,

§

fn from_ref(input: &T) -> T

Converts to this type from a reference to the input type.
§

impl<T> Instrument for T

§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided [Span], returning an Instrumented wrapper. Read more
§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
source§

impl<T, U> Into<U> for T
where U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T> IntoRequest<T> for T

source§

fn into_request(self) -> Request<T>

Wrap the input message T in a tonic::Request
source§

impl<T> ToOwned for T
where T: Clone,

§

type Owned = T

The resulting type after obtaining ownership.
source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
§

impl<V, T> VZip<V> for T
where V: MultiLane<T>,

§

fn vzip(self) -> V

§

impl<T> WithSubscriber for T

§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a [WithDispatch] wrapper. Read more
§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a [WithDispatch] wrapper. Read more