pub struct HttpRetryPolicy {
    pub num_retries: Option<u32>,
    pub per_try_timeout: Option<Duration>,
    pub retry_conditions: Vec<String>,
}
Expand description

The retry policy associates with HttpRouteRule

Fields§

§num_retries: Option<u32>

Specifies the allowed number retries. This number must be > 0. If not specified, defaults to 1.

§per_try_timeout: Option<Duration>

Specifies a non-zero timeout per retry attempt. If not specified, will use the timeout set in the HttpRouteAction field. If timeout in the HttpRouteAction field is not set, this field uses the largest timeout among all backend services associated with the route. Not supported when the URL map is bound to a target gRPC proxy that has the validateForProxyless field set to true.

§retry_conditions: Vec<String>

Specifies one or more conditions when this retry policy applies. Valid values are: - 5xx: retry is attempted if the instance or endpoint responds with any 5xx response code, or if the instance or endpoint does not respond at all. For example, disconnects, reset, read timeout, connection failure, and refused streams. - gateway-error: Similar to 5xx, but only applies to response codes 502, 503 or 504. - connect-failure: a retry is attempted on failures connecting to the instance or endpoint. For example, connection timeouts. - retriable-4xx: a retry is attempted if the instance or endpoint responds with a 4xx response code. The only error that you can retry is error code 409. - refused-stream: a retry is attempted if the instance or endpoint resets the stream with a REFUSED_STREAM error code. This reset type indicates that it is safe to retry. - cancelled: a retry is attempted if the gRPC status code in the response header is set to cancelled. - deadline-exceeded: a retry is attempted if the gRPC status code in the response header is set to deadline-exceeded. - internal: a retry is attempted if the gRPC status code in the response header is set to internal. - resource-exhausted: a retry is attempted if the gRPC status code in the response header is set to resource-exhausted. - unavailable: a retry is attempted if the gRPC status code in the response header is set to unavailable. Only the following codes are supported when the URL map is bound to target gRPC proxy that has validateForProxyless field set to true. - cancelled - deadline-exceeded - internal - resource-exhausted - unavailable

Implementations§

source§

impl HttpRetryPolicy

source

pub fn num_retries(&self) -> u32

Returns the value of num_retries, or the default value if num_retries is unset.

Trait Implementations§

source§

impl Clone for HttpRetryPolicy

source§

fn clone(&self) -> HttpRetryPolicy

Returns a copy of the value. Read more
1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
source§

impl Debug for HttpRetryPolicy

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
source§

impl Default for HttpRetryPolicy

source§

fn default() -> Self

Returns the “default value” for a type. Read more
source§

impl Message for HttpRetryPolicy

source§

fn encoded_len(&self) -> usize

Returns the encoded length of the message without a length delimiter.
source§

fn clear(&mut self)

Clears the message, resetting all fields to their default.
source§

fn encode<B>(&self, buf: &mut B) -> Result<(), EncodeError>
where B: BufMut, Self: Sized,

Encodes the message to a buffer. Read more
source§

fn encode_to_vec(&self) -> Vec<u8>
where Self: Sized,

Encodes the message to a newly allocated buffer.
source§

fn encode_length_delimited<B>(&self, buf: &mut B) -> Result<(), EncodeError>
where B: BufMut, Self: Sized,

Encodes the message with a length-delimiter to a buffer. Read more
source§

fn encode_length_delimited_to_vec(&self) -> Vec<u8>
where Self: Sized,

Encodes the message with a length-delimiter to a newly allocated buffer.
source§

fn decode<B>(buf: B) -> Result<Self, DecodeError>
where B: Buf, Self: Default,

Decodes an instance of the message from a buffer. Read more
source§

fn decode_length_delimited<B>(buf: B) -> Result<Self, DecodeError>
where B: Buf, Self: Default,

Decodes a length-delimited instance of the message from the buffer.
source§

fn merge<B>(&mut self, buf: B) -> Result<(), DecodeError>
where B: Buf, Self: Sized,

Decodes an instance of the message from a buffer, and merges it into self. Read more
source§

fn merge_length_delimited<B>(&mut self, buf: B) -> Result<(), DecodeError>
where B: Buf, Self: Sized,

Decodes a length-delimited instance of the message from buffer, and merges it into self.
source§

impl PartialEq for HttpRetryPolicy

source§

fn eq(&self, other: &HttpRetryPolicy) -> bool

This method tests for self and other values to be equal, and is used by ==.
1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
source§

impl StructuralPartialEq for HttpRetryPolicy

Auto Trait Implementations§

Blanket Implementations§

source§

impl<T> Any for T
where T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for T
where T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

§

impl<T> FromRef<T> for T
where T: Clone,

§

fn from_ref(input: &T) -> T

Converts to this type from a reference to the input type.
§

impl<T> Instrument for T

§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided [Span], returning an Instrumented wrapper. Read more
§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
source§

impl<T, U> Into<U> for T
where U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T> IntoRequest<T> for T

source§

fn into_request(self) -> Request<T>

Wrap the input message T in a tonic::Request
source§

impl<T> ToOwned for T
where T: Clone,

§

type Owned = T

The resulting type after obtaining ownership.
source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
§

impl<V, T> VZip<V> for T
where V: MultiLane<T>,

§

fn vzip(self) -> V

§

impl<T> WithSubscriber for T

§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a [WithDispatch] wrapper. Read more
§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a [WithDispatch] wrapper. Read more