Struct googapis::google::cloud::securitycenter::v1p1beta1::ListAssetsRequest

pub struct ListAssetsRequest {
    pub parent: String,
    pub filter: String,
    pub order_by: String,
    pub read_time: Option<Timestamp>,
    pub compare_duration: Option<Duration>,
    pub field_mask: Option<FieldMask>,
    pub page_token: String,
    pub page_size: i32,
}

Request message for listing assets.

Fields

parent: String

Required. Name of the organization assets should belong to. Its format is “organizations/[organization_id], folders/[folder_id], or projects/[project_id]”.

filter: String

Expression that defines the filter to apply across assets. The expression is a list of zero or more restrictions combined via logical operators AND and OR. Parentheses are supported, and OR has higher precedence than AND.

Restrictions have the form <field> <operator> <value> and may have a - character in front of them to indicate negation. The fields map to those defined in the Asset resource. Examples include:

• name
• security_center_properties.resource_name
• resource_properties.a_property
• security_marks.marks.marka

The supported operators are:

• = for all value types.
• >, <, >=, <= for integer values.
• :, meaning substring matching, for strings.

The supported value types are:

• string literals in quotes.
• integer literals without quotes.
• boolean literals true and false without quotes.

The following are the allowed field and operator combinations:

• name: =

• update_time: =, >, <, >=, <=

  Usage: This should be milliseconds since epoch or an RFC3339 string. Examples: update_time = "2019-06-10T16:07:18-07:00" update_time = 1560208038000

• create_time: =, >, <, >=, <=

  Usage: This should be milliseconds since epoch or an RFC3339 string. Examples: create_time = "2019-06-10T16:07:18-07:00" create_time = 1560208038000

• iam_policy.policy_blob: =, :

• resource_properties: =, :, >, <, >=, <=

• security_marks.marks: =, :

• security_center_properties.resource_name: =, :

• security_center_properties.resource_display_name: =, :

• security_center_properties.resource_type: =, :

• security_center_properties.resource_parent: =, :

• security_center_properties.resource_parent_display_name: =, :

• security_center_properties.resource_project: =, :

• security_center_properties.resource_project_display_name: =, :

• security_center_properties.resource_owners: =, :

For example, resource_properties.size = 100 is a valid filter string.

Use a partial match on the empty string to filter based on a property existing: resource_properties.my_property : ""

Use a negated partial match on the empty string to filter based on a property not existing: -resource_properties.my_property : ""

order_by: String

Expression that defines what fields and order to use for sorting. The string value should follow SQL syntax: comma separated list of fields. For example: “name,resource_properties.a_property”. The default sorting order is ascending. To specify descending order for a field, a suffix “ desc“ should be appended to the field name. For example: “name desc,resource_properties.a_property”. Redundant space characters in the syntax are insignificant. “name desc,resource_properties.a_property” and “ name desc , resource_properties.a_property “ are equivalent.

The following fields are supported: name update_time resource_properties security_marks.marks security_center_properties.resource_name security_center_properties.resource_display_name security_center_properties.resource_parent security_center_properties.resource_parent_display_name security_center_properties.resource_project security_center_properties.resource_project_display_name security_center_properties.resource_type

read_time: Option<Timestamp>

Time used as a reference point when filtering assets. The filter is limited to assets existing at the supplied time and their values are those at that specific time. Absence of this field will default to the API’s version of NOW.

compare_duration: Option<Duration>

When compare_duration is set, the ListAssetsResult’s “state_change” attribute is updated to indicate whether the asset was added, removed, or remained present during the compare_duration period of time that precedes the read_time. This is the time between (read_time - compare_duration) and read_time.

The state_change value is derived based on the presence of the asset at the two points in time. Intermediate state changes between the two times don’t affect the result. For example, the results aren’t affected if the asset is removed and re-created again.

Possible “state_change” values when compare_duration is specified:

• “ADDED”: indicates that the asset was not present at the start of compare_duration, but present at read_time.
• “REMOVED”: indicates that the asset was present at the start of compare_duration, but not present at read_time.
• “ACTIVE”: indicates that the asset was present at both the start and the end of the time period defined by compare_duration and read_time.

If compare_duration is not specified, then the only possible state_change is “UNUSED”, which will be the state_change set for all assets present at read_time.

field_mask: Option<FieldMask>

A field mask to specify the ListAssetsResult fields to be listed in the response. An empty field mask will list all fields.

page_token: String

The value returned by the last ListAssetsResponse; indicates that this is a continuation of a prior ListAssets call, and that the system should return the next page of data.

page_size: i32

The maximum number of results to return in a single response. Default is 10, minimum is 1, maximum is 1000.

Trait Implementations

impl Clone for ListAssetsRequest

fn clone(&self) -> ListAssetsRequest

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for ListAssetsRequest

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for ListAssetsRequest

fn default() -> Self

Returns the “default value” for a type.

impl Message for ListAssetsRequest

fn encode_raw<B>(&self, buf: &mut B) where
    B: BufMut, 

fn merge_field<B>(
    &mut self,
    tag: u32,
    wire_type: WireType,
    buf: &mut B,
    ctx: DecodeContext
) -> Result<(), DecodeError> where
    B: Buf, 

fn encoded_len(&self) -> usize

Returns the encoded length of the message without a length delimiter.

fn clear(&mut self)

Clears the message, resetting all fields to their default.

fn encode<B>(&self, buf: &mut B) -> Result<(), EncodeError> where
    B: BufMut, 

Encodes the message to a buffer.

fn encode_to_vec(&self) -> Vec<u8, Global>

Encodes the message to a newly allocated buffer.

fn encode_length_delimited<B>(&self, buf: &mut B) -> Result<(), EncodeError> where
    B: BufMut, 

Encodes the message with a length-delimiter to a buffer.

fn encode_length_delimited_to_vec(&self) -> Vec<u8, Global>

Encodes the message with a length-delimiter to a newly allocated buffer.

fn decode<B>(buf: B) -> Result<Self, DecodeError> where
    Self: Default,
    B: Buf, 

Decodes an instance of the message from a buffer.

fn decode_length_delimited<B>(buf: B) -> Result<Self, DecodeError> where
    Self: Default,
    B: Buf, 

Decodes a length-delimited instance of the message from the buffer.

fn merge<B>(&mut self, buf: B) -> Result<(), DecodeError> where
    B: Buf, 

Decodes an instance of the message from a buffer, and merges it into self.

fn merge_length_delimited<B>(&mut self, buf: B) -> Result<(), DecodeError> where
    B: Buf, 

Decodes a length-delimited instance of the message from buffer, and merges it into self.

impl PartialEq<ListAssetsRequest> for ListAssetsRequest

fn eq(&self, other: &ListAssetsRequest) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &ListAssetsRequest) -> bool

This method tests for !=.

impl StructuralPartialEq for ListAssetsRequest