// This file is @generated by prost-build.
/// Http target. The job will be pushed to the job handler by means of
/// an HTTP request via an
/// [http_method][google.cloud.scheduler.v1.HttpTarget.http_method] such as HTTP
/// POST, HTTP GET, etc. The job is acknowledged by means of an HTTP
/// response code in the range \[200 - 299\]. A failure to receive a response
/// constitutes a failed execution. For a redirected request, the response
/// returned by the redirected request is considered.
#[derive(Clone, PartialEq, ::prost::Message)]
pub struct HttpTarget {
    /// Required. The full URI path that the request will be sent to. This string
    /// must begin with either "<http://"> or "<https://".> Some examples of
    /// valid values for [uri][google.cloud.scheduler.v1.HttpTarget.uri] are:
    /// `<http://acme.com`> and `<https://acme.com/sales:8080`.> Cloud Scheduler will
    /// encode some characters for safety and compatibility. The maximum allowed
    /// URL length is 2083 characters after encoding.
    #[prost(string, tag = "1")]
    pub uri: ::prost::alloc::string::String,
    /// Which HTTP method to use for the request.
    #[prost(enumeration = "HttpMethod", tag = "2")]
    pub http_method: i32,
    /// The user can specify HTTP request headers to send with the job's
    /// HTTP request. This map contains the header field names and
    /// values. Repeated headers are not supported, but a header value can
    /// contain commas. These headers represent a subset of the headers
    /// that will accompany the job's HTTP request. Some HTTP request
    /// headers will be ignored or replaced. A partial list of headers that
    /// will be ignored or replaced is below:
    /// - Host: This will be computed by Cloud Scheduler and derived from
    /// [uri][google.cloud.scheduler.v1.HttpTarget.uri].
    /// * `Content-Length`: This will be computed by Cloud Scheduler.
    /// * `User-Agent`: This will be set to `"Google-Cloud-Scheduler"`.
    /// * `X-Google-*`: Google internal use only.
    /// * `X-AppEngine-*`: Google internal use only.
    /// * `X-CloudScheduler`: This header will be set to true.
    /// * `X-CloudScheduler-JobName`: This header will contain the job name.
    /// * `X-CloudScheduler-ScheduleTime`: For Cloud Scheduler jobs specified in
    /// the unix-cron format, this header will contain the job schedule as an
    /// offset of UTC parsed according to RFC3339.
    ///
    /// The total size of headers must be less than 80KB.
    #[prost(btree_map = "string, string", tag = "3")]
    pub headers: ::prost::alloc::collections::BTreeMap<
        ::prost::alloc::string::String,
        ::prost::alloc::string::String,
    >,
    /// HTTP request body. A request body is allowed only if the HTTP
    /// method is POST, PUT, or PATCH. It is an error to set body on a job with an
    /// incompatible [HttpMethod][google.cloud.scheduler.v1.HttpMethod].
    #[prost(bytes = "bytes", tag = "4")]
    pub body: ::prost::bytes::Bytes,
    /// The mode for generating an `Authorization` header for HTTP requests.
    ///
    /// If specified, all `Authorization` headers in the
    /// [HttpTarget.headers][google.cloud.scheduler.v1.HttpTarget.headers] field
    /// will be overridden.
    #[prost(oneof = "http_target::AuthorizationHeader", tags = "5, 6")]
    pub authorization_header: ::core::option::Option<http_target::AuthorizationHeader>,
}
/// Nested message and enum types in `HttpTarget`.
pub mod http_target {
    /// The mode for generating an `Authorization` header for HTTP requests.
    ///
    /// If specified, all `Authorization` headers in the
    /// [HttpTarget.headers][google.cloud.scheduler.v1.HttpTarget.headers] field
    /// will be overridden.
    #[derive(Clone, PartialEq, ::prost::Oneof)]
    pub enum AuthorizationHeader {
        /// If specified, an
        /// [OAuth token](<https://developers.google.com/identity/protocols/OAuth2>)
        /// will be generated and attached as an `Authorization` header in the HTTP
        /// request.
        ///
        /// This type of authorization should generally only be used when calling
        /// Google APIs hosted on *.googleapis.com.
        #[prost(message, tag = "5")]
        OauthToken(super::OAuthToken),
        /// If specified, an
        /// [OIDC](<https://developers.google.com/identity/protocols/OpenIDConnect>)
        /// token will be generated and attached as an `Authorization` header in the
        /// HTTP request.
        ///
        /// This type of authorization can be used for many scenarios, including
        /// calling Cloud Run, or endpoints where you intend to validate the token
        /// yourself.
        #[prost(message, tag = "6")]
        OidcToken(super::OidcToken),
    }
}
/// App Engine target. The job will be pushed to a job handler by means
/// of an HTTP request via an
/// [http_method][google.cloud.scheduler.v1.AppEngineHttpTarget.http_method] such
/// as HTTP POST, HTTP GET, etc. The job is acknowledged by means of an
/// HTTP response code in the range \[200 - 299\]. Error 503 is
/// considered an App Engine system error instead of an application
/// error. Requests returning error 503 will be retried regardless of
/// retry configuration and not counted against retry counts. Any other
/// response code, or a failure to receive a response before the
/// deadline, constitutes a failed attempt.
#[derive(Clone, PartialEq, ::prost::Message)]
pub struct AppEngineHttpTarget {
    /// The HTTP method to use for the request. PATCH and OPTIONS are not
    /// permitted.
    #[prost(enumeration = "HttpMethod", tag = "1")]
    pub http_method: i32,
    /// App Engine Routing setting for the job.
    #[prost(message, optional, tag = "2")]
    pub app_engine_routing: ::core::option::Option<AppEngineRouting>,
    /// The relative URI.
    ///
    /// The relative URL must begin with "/" and must be a valid HTTP relative URL.
    /// It can contain a path, query string arguments, and `#` fragments.
    /// If the relative URL is empty, then the root path "/" will be used.
    /// No spaces are allowed, and the maximum length allowed is 2083 characters.
    #[prost(string, tag = "3")]
    pub relative_uri: ::prost::alloc::string::String,
    /// HTTP request headers.
    ///
    /// This map contains the header field names and values. Headers can be set
    /// when the job is created.
    ///
    /// Cloud Scheduler sets some headers to default values:
    ///
    /// * `User-Agent`: By default, this header is
    ///    `"AppEngine-Google; (+<http://code.google.com/appengine>)"`.
    ///    This header can be modified, but Cloud Scheduler will append
    ///    `"AppEngine-Google; (+<http://code.google.com/appengine>)"` to the
    ///    modified `User-Agent`.
    /// * `X-CloudScheduler`: This header will be set to true.
    /// * `X-CloudScheduler-JobName`: This header will contain the job name.
    /// * `X-CloudScheduler-ScheduleTime`: For Cloud Scheduler jobs specified in
    /// the unix-cron format, this header will contain the job schedule as an
    /// offset of UTC parsed according to RFC3339.
    ///
    /// If the job has an
    /// [body][google.cloud.scheduler.v1.AppEngineHttpTarget.body], Cloud Scheduler
    /// sets the following headers:
    ///
    /// * `Content-Type`: By default, the `Content-Type` header is set to
    ///    `"application/octet-stream"`. The default can be overridden by explictly
    ///    setting `Content-Type` to a particular media type when the job is
    ///    created.
    ///    For example, `Content-Type` can be set to `"application/json"`.
    /// * `Content-Length`: This is computed by Cloud Scheduler. This value is
    ///    output only. It cannot be changed.
    ///
    /// The headers below are output only. They cannot be set or overridden:
    ///
    /// * `X-Google-*`: For Google internal use only.
    /// * `X-AppEngine-*`: For Google internal use only.
    ///
    /// In addition, some App Engine headers, which contain
    /// job-specific information, are also be sent to the job handler.
    #[prost(btree_map = "string, string", tag = "4")]
    pub headers: ::prost::alloc::collections::BTreeMap<
        ::prost::alloc::string::String,
        ::prost::alloc::string::String,
    >,
    /// Body.
    ///
    /// HTTP request body. A request body is allowed only if the HTTP method is
    /// POST or PUT. It will result in invalid argument error to set a body on a
    /// job with an incompatible
    /// [HttpMethod][google.cloud.scheduler.v1.HttpMethod].
    #[prost(bytes = "bytes", tag = "5")]
    pub body: ::prost::bytes::Bytes,
}
/// Pub/Sub target. The job will be delivered by publishing a message to
/// the given Pub/Sub topic.
#[derive(Clone, PartialEq, ::prost::Message)]
pub struct PubsubTarget {
    /// Required. The name of the Cloud Pub/Sub topic to which messages will
    /// be published when a job is delivered. The topic name must be in the
    /// same format as required by Pub/Sub's
    /// [PublishRequest.name](<https://cloud.google.com/pubsub/docs/reference/rpc/google.pubsub.v1#publishrequest>),
    /// for example `projects/PROJECT_ID/topics/TOPIC_ID`.
    ///
    /// The topic must be in the same project as the Cloud Scheduler job.
    #[prost(string, tag = "1")]
    pub topic_name: ::prost::alloc::string::String,
    /// The message payload for PubsubMessage.
    ///
    /// Pubsub message must contain either non-empty data, or at least one
    /// attribute.
    #[prost(bytes = "bytes", tag = "3")]
    pub data: ::prost::bytes::Bytes,
    /// Attributes for PubsubMessage.
    ///
    /// Pubsub message must contain either non-empty data, or at least one
    /// attribute.
    #[prost(btree_map = "string, string", tag = "4")]
    pub attributes: ::prost::alloc::collections::BTreeMap<
        ::prost::alloc::string::String,
        ::prost::alloc::string::String,
    >,
}
/// App Engine Routing.
///
/// For more information about services, versions, and instances see
/// [An Overview of App
/// Engine](<https://cloud.google.com/appengine/docs/python/an-overview-of-app-engine>),
/// [Microservices Architecture on Google App
/// Engine](<https://cloud.google.com/appengine/docs/python/microservices-on-app-engine>),
/// [App Engine Standard request
/// routing](<https://cloud.google.com/appengine/docs/standard/python/how-requests-are-routed>),
/// and [App Engine Flex request
/// routing](<https://cloud.google.com/appengine/docs/flexible/python/how-requests-are-routed>).
#[derive(Clone, PartialEq, ::prost::Message)]
pub struct AppEngineRouting {
    /// App service.
    ///
    /// By default, the job is sent to the service which is the default
    /// service when the job is attempted.
    #[prost(string, tag = "1")]
    pub service: ::prost::alloc::string::String,
    /// App version.
    ///
    /// By default, the job is sent to the version which is the default
    /// version when the job is attempted.
    #[prost(string, tag = "2")]
    pub version: ::prost::alloc::string::String,
    /// App instance.
    ///
    /// By default, the job is sent to an instance which is available when
    /// the job is attempted.
    ///
    /// Requests can only be sent to a specific instance if
    /// [manual scaling is used in App Engine
    /// Standard](<https://cloud.google.com/appengine/docs/python/an-overview-of-app-engine?#scaling_types_and_instance_classes>).
    /// App Engine Flex does not support instances. For more information, see
    /// [App Engine Standard request
    /// routing](<https://cloud.google.com/appengine/docs/standard/python/how-requests-are-routed>)
    /// and [App Engine Flex request
    /// routing](<https://cloud.google.com/appengine/docs/flexible/python/how-requests-are-routed>).
    #[prost(string, tag = "3")]
    pub instance: ::prost::alloc::string::String,
    /// Output only. The host that the job is sent to.
    ///
    /// For more information about how App Engine requests are routed, see
    /// [here](<https://cloud.google.com/appengine/docs/standard/python/how-requests-are-routed>).
    ///
    /// The host is constructed as:
    ///
    ///
    /// * `host = \[application_domain_name\]`</br>
    ///    `| \[service\] + '.' + \[application_domain_name\]`</br>
    ///    `| \[version\] + '.' + \[application_domain_name\]`</br>
    ///    `| \[version_dot_service\]+ '.' + \[application_domain_name\]`</br>
    ///    `| \[instance\] + '.' + \[application_domain_name\]`</br>
    ///    `| \[instance_dot_service\] + '.' + \[application_domain_name\]`</br>
    ///    `| \[instance_dot_version\] + '.' + \[application_domain_name\]`</br>
    ///    `| \[instance_dot_version_dot_service\] + '.' + \[application_domain_name\]`
    ///
    /// * `application_domain_name` = The domain name of the app, for
    ///    example <app-id>.appspot.com, which is associated with the
    ///    job's project ID.
    ///
    /// * `service =` [service][google.cloud.scheduler.v1.AppEngineRouting.service]
    ///
    /// * `version =` [version][google.cloud.scheduler.v1.AppEngineRouting.version]
    ///
    /// * `version_dot_service =`
    ///    [version][google.cloud.scheduler.v1.AppEngineRouting.version] `+ '.' +`
    ///    [service][google.cloud.scheduler.v1.AppEngineRouting.service]
    ///
    /// * `instance =`
    /// [instance][google.cloud.scheduler.v1.AppEngineRouting.instance]
    ///
    /// * `instance_dot_service =`
    ///    [instance][google.cloud.scheduler.v1.AppEngineRouting.instance] `+ '.' +`
    ///    [service][google.cloud.scheduler.v1.AppEngineRouting.service]
    ///
    /// * `instance_dot_version =`
    ///    [instance][google.cloud.scheduler.v1.AppEngineRouting.instance] `+ '.' +`
    ///    [version][google.cloud.scheduler.v1.AppEngineRouting.version]
    ///
    /// * `instance_dot_version_dot_service =`
    ///    [instance][google.cloud.scheduler.v1.AppEngineRouting.instance] `+ '.' +`
    ///    [version][google.cloud.scheduler.v1.AppEngineRouting.version] `+ '.' +`
    ///    [service][google.cloud.scheduler.v1.AppEngineRouting.service]
    ///
    ///
    /// If [service][google.cloud.scheduler.v1.AppEngineRouting.service] is empty,
    /// then the job will be sent to the service which is the default service when
    /// the job is attempted.
    ///
    /// If [version][google.cloud.scheduler.v1.AppEngineRouting.version] is empty,
    /// then the job will be sent to the version which is the default version when
    /// the job is attempted.
    ///
    /// If [instance][google.cloud.scheduler.v1.AppEngineRouting.instance] is
    /// empty, then the job will be sent to an instance which is available when the
    /// job is attempted.
    ///
    /// If [service][google.cloud.scheduler.v1.AppEngineRouting.service],
    /// [version][google.cloud.scheduler.v1.AppEngineRouting.version], or
    /// [instance][google.cloud.scheduler.v1.AppEngineRouting.instance] is invalid,
    /// then the job will be sent to the default version of the default service
    /// when the job is attempted.
    #[prost(string, tag = "4")]
    pub host: ::prost::alloc::string::String,
}
/// Contains information needed for generating an
/// [OAuth token](<https://developers.google.com/identity/protocols/OAuth2>).
/// This type of authorization should generally only be used when calling Google
/// APIs hosted on *.googleapis.com.
#[derive(Clone, PartialEq, ::prost::Message)]
pub struct OAuthToken {
    /// [Service account email](<https://cloud.google.com/iam/docs/service-accounts>)
    /// to be used for generating OAuth token.
    /// The service account must be within the same project as the job. The caller
    /// must have iam.serviceAccounts.actAs permission for the service account.
    #[prost(string, tag = "1")]
    pub service_account_email: ::prost::alloc::string::String,
    /// OAuth scope to be used for generating OAuth access token.
    /// If not specified, "<https://www.googleapis.com/auth/cloud-platform">
    /// will be used.
    #[prost(string, tag = "2")]
    pub scope: ::prost::alloc::string::String,
}
/// Contains information needed for generating an
/// [OpenID Connect
/// token](<https://developers.google.com/identity/protocols/OpenIDConnect>).
/// This type of authorization can be used for many scenarios, including
/// calling Cloud Run, or endpoints where you intend to validate the token
/// yourself.
#[derive(Clone, PartialEq, ::prost::Message)]
pub struct OidcToken {
    /// [Service account email](<https://cloud.google.com/iam/docs/service-accounts>)
    /// to be used for generating OIDC token.
    /// The service account must be within the same project as the job. The caller
    /// must have iam.serviceAccounts.actAs permission for the service account.
    #[prost(string, tag = "1")]
    pub service_account_email: ::prost::alloc::string::String,
    /// Audience to be used when generating OIDC token. If not specified, the URI
    /// specified in target will be used.
    #[prost(string, tag = "2")]
    pub audience: ::prost::alloc::string::String,
}
/// The HTTP method used to execute the job.
#[derive(Clone, Copy, Debug, PartialEq, Eq, Hash, PartialOrd, Ord, ::prost::Enumeration)]
#[repr(i32)]
pub enum HttpMethod {
    /// HTTP method unspecified. Defaults to POST.
    Unspecified = 0,
    /// HTTP POST
    Post = 1,
    /// HTTP GET
    Get = 2,
    /// HTTP HEAD
    Head = 3,
    /// HTTP PUT
    Put = 4,
    /// HTTP DELETE
    Delete = 5,
    /// HTTP PATCH
    Patch = 6,
    /// HTTP OPTIONS
    Options = 7,
}
impl HttpMethod {
    /// String value of the enum field names used in the ProtoBuf definition.
    ///
    /// The values are not transformed in any way and thus are considered stable
    /// (if the ProtoBuf definition does not change) and safe for programmatic use.
    pub fn as_str_name(&self) -> &'static str {
        match self {
            HttpMethod::Unspecified => "HTTP_METHOD_UNSPECIFIED",
            HttpMethod::Post => "POST",
            HttpMethod::Get => "GET",
            HttpMethod::Head => "HEAD",
            HttpMethod::Put => "PUT",
            HttpMethod::Delete => "DELETE",
            HttpMethod::Patch => "PATCH",
            HttpMethod::Options => "OPTIONS",
        }
    }
    /// Creates an enum from field names used in the ProtoBuf definition.
    pub fn from_str_name(value: &str) -> ::core::option::Option<Self> {
        match value {
            "HTTP_METHOD_UNSPECIFIED" => Some(Self::Unspecified),
            "POST" => Some(Self::Post),
            "GET" => Some(Self::Get),
            "HEAD" => Some(Self::Head),
            "PUT" => Some(Self::Put),
            "DELETE" => Some(Self::Delete),
            "PATCH" => Some(Self::Patch),
            "OPTIONS" => Some(Self::Options),
            _ => None,
        }
    }
}
/// Configuration for a job.
/// The maximum allowed size for a job is 1MB.
#[derive(Clone, PartialEq, ::prost::Message)]
pub struct Job {
    /// Optionally caller-specified in
    /// [CreateJob][google.cloud.scheduler.v1.CloudScheduler.CreateJob], after
    /// which it becomes output only.
    ///
    /// The job name. For example:
    /// `projects/PROJECT_ID/locations/LOCATION_ID/jobs/JOB_ID`.
    ///
    /// * `PROJECT_ID` can contain letters (\[A-Za-z\]), numbers (\[0-9\]),
    ///     hyphens (-), colons (:), or periods (.).
    ///     For more information, see
    ///     [Identifying
    ///     projects](<https://cloud.google.com/resource-manager/docs/creating-managing-projects#identifying_projects>)
    /// * `LOCATION_ID` is the canonical ID for the job's location.
    ///     The list of available locations can be obtained by calling
    ///     [ListLocations][google.cloud.location.Locations.ListLocations].
    ///     For more information, see <https://cloud.google.com/about/locations/.>
    /// * `JOB_ID` can contain only letters (\[A-Za-z\]), numbers (\[0-9\]),
    ///     hyphens (-), or underscores (_). The maximum length is 500 characters.
    #[prost(string, tag = "1")]
    pub name: ::prost::alloc::string::String,
    /// Optionally caller-specified in
    /// [CreateJob][google.cloud.scheduler.v1.CloudScheduler.CreateJob] or
    /// [UpdateJob][google.cloud.scheduler.v1.CloudScheduler.UpdateJob].
    ///
    /// A human-readable description for the job. This string must not contain
    /// more than 500 characters.
    #[prost(string, tag = "2")]
    pub description: ::prost::alloc::string::String,
    /// Required, except when used with
    /// [UpdateJob][google.cloud.scheduler.v1.CloudScheduler.UpdateJob].
    ///
    /// Describes the schedule on which the job will be executed.
    ///
    /// The schedule can be either of the following types:
    ///
    /// * [Crontab](<https://en.wikipedia.org/wiki/Cron#Overview>)
    /// * English-like
    /// [schedule](<https://cloud.google.com/scheduler/docs/configuring/cron-job-schedules>)
    ///
    /// As a general rule, execution `n + 1` of a job will not begin
    /// until execution `n` has finished. Cloud Scheduler will never
    /// allow two simultaneously outstanding executions. For example,
    /// this implies that if the `n+1`th execution is scheduled to run at
    /// 16:00 but the `n`th execution takes until 16:15, the `n+1`th
    /// execution will not start until `16:15`.
    /// A scheduled start time will be delayed if the previous
    /// execution has not ended when its scheduled time occurs.
    ///
    /// If [retry_count][google.cloud.scheduler.v1.RetryConfig.retry_count] > 0 and
    /// a job attempt fails, the job will be tried a total of
    /// [retry_count][google.cloud.scheduler.v1.RetryConfig.retry_count] times,
    /// with exponential backoff, until the next scheduled start time.
    #[prost(string, tag = "20")]
    pub schedule: ::prost::alloc::string::String,
    /// Specifies the time zone to be used in interpreting
    /// [schedule][google.cloud.scheduler.v1.Job.schedule]. The value of this field
    /// must be a time zone name from the [tz
    /// database](<http://en.wikipedia.org/wiki/Tz_database>).
    ///
    /// Note that some time zones include a provision for
    /// daylight savings time. The rules for daylight saving time are
    /// determined by the chosen tz. For UTC use the string "utc". If a
    /// time zone is not specified, the default will be in UTC (also known
    /// as GMT).
    #[prost(string, tag = "21")]
    pub time_zone: ::prost::alloc::string::String,
    /// Output only. The creation time of the job.
    #[prost(message, optional, tag = "9")]
    pub user_update_time: ::core::option::Option<::prost_types::Timestamp>,
    /// Output only. State of the job.
    #[prost(enumeration = "job::State", tag = "10")]
    pub state: i32,
    /// Output only. The response from the target for the last attempted execution.
    #[prost(message, optional, tag = "11")]
    pub status: ::core::option::Option<super::super::super::rpc::Status>,
    /// Output only. The next time the job is scheduled. Note that this may be a
    /// retry of a previously failed attempt or the next execution time
    /// according to the schedule.
    #[prost(message, optional, tag = "17")]
    pub schedule_time: ::core::option::Option<::prost_types::Timestamp>,
    /// Output only. The time the last job attempt started.
    #[prost(message, optional, tag = "18")]
    pub last_attempt_time: ::core::option::Option<::prost_types::Timestamp>,
    /// Settings that determine the retry behavior.
    #[prost(message, optional, tag = "19")]
    pub retry_config: ::core::option::Option<RetryConfig>,
    /// The deadline for job attempts. If the request handler does not respond by
    /// this deadline then the request is cancelled and the attempt is marked as a
    /// `DEADLINE_EXCEEDED` failure. The failed attempt can be viewed in
    /// execution logs. Cloud Scheduler will retry the job according
    /// to the [RetryConfig][google.cloud.scheduler.v1.RetryConfig].
    ///
    /// The default and the allowed values depend on the type of target:
    ///
    /// * For [HTTP targets][google.cloud.scheduler.v1.Job.http_target], the
    /// default is 3 minutes. The deadline must be in the interval [15 seconds, 30
    /// minutes].
    ///
    /// * For [App Engine HTTP
    /// targets][google.cloud.scheduler.v1.Job.app_engine_http_target], 0 indicates
    /// that the request has the default deadline. The default deadline depends on
    /// the scaling type of the service: 10 minutes for standard apps with
    /// automatic scaling, 24 hours for standard apps with manual and basic
    /// scaling, and 60 minutes for flex apps. If the request deadline is set, it
    /// must be in the interval \[15 seconds, 24 hours 15 seconds\].
    ///
    /// * For [Pub/Sub targets][google.cloud.scheduler.v1.Job.pubsub_target], this
    /// field is ignored.
    #[prost(message, optional, tag = "22")]
    pub attempt_deadline: ::core::option::Option<::prost_types::Duration>,
    /// Required.
    ///
    /// Delivery settings containing destination and parameters.
    #[prost(oneof = "job::Target", tags = "4, 5, 6")]
    pub target: ::core::option::Option<job::Target>,
}
/// Nested message and enum types in `Job`.
pub mod job {
    /// State of the job.
    #[derive(
        Clone,
        Copy,
        Debug,
        PartialEq,
        Eq,
        Hash,
        PartialOrd,
        Ord,
        ::prost::Enumeration
    )]
    #[repr(i32)]
    pub enum State {
        /// Unspecified state.
        Unspecified = 0,
        /// The job is executing normally.
        Enabled = 1,
        /// The job is paused by the user. It will not execute. A user can
        /// intentionally pause the job using
        /// [PauseJobRequest][google.cloud.scheduler.v1.PauseJobRequest].
        Paused = 2,
        /// The job is disabled by the system due to error. The user
        /// cannot directly set a job to be disabled.
        Disabled = 3,
        /// The job state resulting from a failed
        /// [CloudScheduler.UpdateJob][google.cloud.scheduler.v1.CloudScheduler.UpdateJob]
        /// operation. To recover a job from this state, retry
        /// [CloudScheduler.UpdateJob][google.cloud.scheduler.v1.CloudScheduler.UpdateJob]
        /// until a successful response is received.
        UpdateFailed = 4,
    }
    impl State {
        /// String value of the enum field names used in the ProtoBuf definition.
        ///
        /// The values are not transformed in any way and thus are considered stable
        /// (if the ProtoBuf definition does not change) and safe for programmatic use.
        pub fn as_str_name(&self) -> &'static str {
            match self {
                State::Unspecified => "STATE_UNSPECIFIED",
                State::Enabled => "ENABLED",
                State::Paused => "PAUSED",
                State::Disabled => "DISABLED",
                State::UpdateFailed => "UPDATE_FAILED",
            }
        }
        /// Creates an enum from field names used in the ProtoBuf definition.
        pub fn from_str_name(value: &str) -> ::core::option::Option<Self> {
            match value {
                "STATE_UNSPECIFIED" => Some(Self::Unspecified),
                "ENABLED" => Some(Self::Enabled),
                "PAUSED" => Some(Self::Paused),
                "DISABLED" => Some(Self::Disabled),
                "UPDATE_FAILED" => Some(Self::UpdateFailed),
                _ => None,
            }
        }
    }
    /// Required.
    ///
    /// Delivery settings containing destination and parameters.
    #[derive(Clone, PartialEq, ::prost::Oneof)]
    pub enum Target {
        /// Pub/Sub target.
        #[prost(message, tag = "4")]
        PubsubTarget(super::PubsubTarget),
        /// App Engine HTTP target.
        #[prost(message, tag = "5")]
        AppEngineHttpTarget(super::AppEngineHttpTarget),
        /// HTTP target.
        #[prost(message, tag = "6")]
        HttpTarget(super::HttpTarget),
    }
}
/// Settings that determine the retry behavior.
///
/// By default, if a job does not complete successfully (meaning that
/// an acknowledgement is not received from the handler, then it will be retried
/// with exponential backoff according to the settings in
/// [RetryConfig][google.cloud.scheduler.v1.RetryConfig].
#[derive(Clone, Copy, PartialEq, ::prost::Message)]
pub struct RetryConfig {
    /// The number of attempts that the system will make to run a job using the
    /// exponential backoff procedure described by
    /// [max_doublings][google.cloud.scheduler.v1.RetryConfig.max_doublings].
    ///
    /// The default value of retry_count is zero.
    ///
    /// If retry_count is zero, a job attempt will *not* be retried if
    /// it fails. Instead the Cloud Scheduler system will wait for the
    /// next scheduled execution time.
    ///
    /// If retry_count is set to a non-zero number then Cloud Scheduler
    /// will retry failed attempts, using exponential backoff,
    /// retry_count times, or until the next scheduled execution time,
    /// whichever comes first.
    ///
    /// Values greater than 5 and negative values are not allowed.
    #[prost(int32, tag = "1")]
    pub retry_count: i32,
    /// The time limit for retrying a failed job, measured from time when an
    /// execution was first attempted. If specified with
    /// [retry_count][google.cloud.scheduler.v1.RetryConfig.retry_count], the job
    /// will be retried until both limits are reached.
    ///
    /// The default value for max_retry_duration is zero, which means retry
    /// duration is unlimited.
    #[prost(message, optional, tag = "2")]
    pub max_retry_duration: ::core::option::Option<::prost_types::Duration>,
    /// The minimum amount of time to wait before retrying a job after
    /// it fails.
    ///
    /// The default value of this field is 5 seconds.
    #[prost(message, optional, tag = "3")]
    pub min_backoff_duration: ::core::option::Option<::prost_types::Duration>,
    /// The maximum amount of time to wait before retrying a job after
    /// it fails.
    ///
    /// The default value of this field is 1 hour.
    #[prost(message, optional, tag = "4")]
    pub max_backoff_duration: ::core::option::Option<::prost_types::Duration>,
    /// The time between retries will double `max_doublings` times.
    ///
    /// A job's retry interval starts at
    /// [min_backoff_duration][google.cloud.scheduler.v1.RetryConfig.min_backoff_duration],
    /// then doubles `max_doublings` times, then increases linearly, and finally
    /// retries at intervals of
    /// [max_backoff_duration][google.cloud.scheduler.v1.RetryConfig.max_backoff_duration]
    /// up to [retry_count][google.cloud.scheduler.v1.RetryConfig.retry_count]
    /// times.
    ///
    /// For example, if
    /// [min_backoff_duration][google.cloud.scheduler.v1.RetryConfig.min_backoff_duration]
    /// is 10s,
    /// [max_backoff_duration][google.cloud.scheduler.v1.RetryConfig.max_backoff_duration]
    /// is 300s, and `max_doublings` is 3, then the a job will first be retried in
    /// 10s. The retry interval will double three times, and then increase linearly
    /// by 2^3 * 10s.  Finally, the job will retry at intervals of
    /// [max_backoff_duration][google.cloud.scheduler.v1.RetryConfig.max_backoff_duration]
    /// until the job has been attempted
    /// [retry_count][google.cloud.scheduler.v1.RetryConfig.retry_count] times.
    /// Thus, the requests will retry at 10s, 20s, 40s, 80s, 160s, 240s, 300s,
    /// 300s, ....
    ///
    /// The default value of this field is 5.
    #[prost(int32, tag = "5")]
    pub max_doublings: i32,
}
/// Request message for listing jobs using
/// [ListJobs][google.cloud.scheduler.v1.CloudScheduler.ListJobs].
#[derive(Clone, PartialEq, ::prost::Message)]
pub struct ListJobsRequest {
    /// Required. The location name. For example:
    /// `projects/PROJECT_ID/locations/LOCATION_ID`.
    #[prost(string, tag = "1")]
    pub parent: ::prost::alloc::string::String,
    /// Requested page size.
    ///
    /// The maximum page size is 500. If unspecified, the page size will
    /// be the maximum. Fewer jobs than requested might be returned,
    /// even if more jobs exist; use next_page_token to determine if more
    /// jobs exist.
    #[prost(int32, tag = "5")]
    pub page_size: i32,
    /// A token identifying a page of results the server will return. To
    /// request the first page results, page_token must be empty. To
    /// request the next page of results, page_token must be the value of
    /// [next_page_token][google.cloud.scheduler.v1.ListJobsResponse.next_page_token]
    /// returned from the previous call to
    /// [ListJobs][google.cloud.scheduler.v1.CloudScheduler.ListJobs]. It is an
    /// error to switch the value of
    /// [filter][google.cloud.scheduler.v1.ListJobsRequest.filter] or
    /// [order_by][google.cloud.scheduler.v1.ListJobsRequest.order_by] while
    /// iterating through pages.
    #[prost(string, tag = "6")]
    pub page_token: ::prost::alloc::string::String,
}
/// Response message for listing jobs using
/// [ListJobs][google.cloud.scheduler.v1.CloudScheduler.ListJobs].
#[derive(Clone, PartialEq, ::prost::Message)]
pub struct ListJobsResponse {
    /// The list of jobs.
    #[prost(message, repeated, tag = "1")]
    pub jobs: ::prost::alloc::vec::Vec<Job>,
    /// A token to retrieve next page of results. Pass this value in the
    /// [page_token][google.cloud.scheduler.v1.ListJobsRequest.page_token] field in
    /// the subsequent call to
    /// [ListJobs][google.cloud.scheduler.v1.CloudScheduler.ListJobs] to retrieve
    /// the next page of results. If this is empty it indicates that there are no
    /// more results through which to paginate.
    ///
    /// The page token is valid for only 2 hours.
    #[prost(string, tag = "2")]
    pub next_page_token: ::prost::alloc::string::String,
}
/// Request message for
/// [GetJob][google.cloud.scheduler.v1.CloudScheduler.GetJob].
#[derive(Clone, PartialEq, ::prost::Message)]
pub struct GetJobRequest {
    /// Required. The job name. For example:
    /// `projects/PROJECT_ID/locations/LOCATION_ID/jobs/JOB_ID`.
    #[prost(string, tag = "1")]
    pub name: ::prost::alloc::string::String,
}
/// Request message for
/// [CreateJob][google.cloud.scheduler.v1.CloudScheduler.CreateJob].
#[derive(Clone, PartialEq, ::prost::Message)]
pub struct CreateJobRequest {
    /// Required. The location name. For example:
    /// `projects/PROJECT_ID/locations/LOCATION_ID`.
    #[prost(string, tag = "1")]
    pub parent: ::prost::alloc::string::String,
    /// Required. The job to add. The user can optionally specify a name for the
    /// job in [name][google.cloud.scheduler.v1.Job.name].
    /// [name][google.cloud.scheduler.v1.Job.name] cannot be the same as an
    /// existing job. If a name is not specified then the system will
    /// generate a random unique name that will be returned
    /// ([name][google.cloud.scheduler.v1.Job.name]) in the response.
    #[prost(message, optional, tag = "2")]
    pub job: ::core::option::Option<Job>,
}
/// Request message for
/// [UpdateJob][google.cloud.scheduler.v1.CloudScheduler.UpdateJob].
#[derive(Clone, PartialEq, ::prost::Message)]
pub struct UpdateJobRequest {
    /// Required. The new job properties.
    /// [name][google.cloud.scheduler.v1.Job.name] must be specified.
    ///
    /// Output only fields cannot be modified using UpdateJob.
    /// Any value specified for an output only field will be ignored.
    #[prost(message, optional, tag = "1")]
    pub job: ::core::option::Option<Job>,
    /// A  mask used to specify which fields of the job are being updated.
    #[prost(message, optional, tag = "2")]
    pub update_mask: ::core::option::Option<::prost_types::FieldMask>,
}
/// Request message for deleting a job using
/// [DeleteJob][google.cloud.scheduler.v1.CloudScheduler.DeleteJob].
#[derive(Clone, PartialEq, ::prost::Message)]
pub struct DeleteJobRequest {
    /// Required. The job name. For example:
    /// `projects/PROJECT_ID/locations/LOCATION_ID/jobs/JOB_ID`.
    #[prost(string, tag = "1")]
    pub name: ::prost::alloc::string::String,
}
/// Request message for
/// [PauseJob][google.cloud.scheduler.v1.CloudScheduler.PauseJob].
#[derive(Clone, PartialEq, ::prost::Message)]
pub struct PauseJobRequest {
    /// Required. The job name. For example:
    /// `projects/PROJECT_ID/locations/LOCATION_ID/jobs/JOB_ID`.
    #[prost(string, tag = "1")]
    pub name: ::prost::alloc::string::String,
}
/// Request message for
/// [ResumeJob][google.cloud.scheduler.v1.CloudScheduler.ResumeJob].
#[derive(Clone, PartialEq, ::prost::Message)]
pub struct ResumeJobRequest {
    /// Required. The job name. For example:
    /// `projects/PROJECT_ID/locations/LOCATION_ID/jobs/JOB_ID`.
    #[prost(string, tag = "1")]
    pub name: ::prost::alloc::string::String,
}
/// Request message for forcing a job to run now using
/// [RunJob][google.cloud.scheduler.v1.CloudScheduler.RunJob].
#[derive(Clone, PartialEq, ::prost::Message)]
pub struct RunJobRequest {
    /// Required. The job name. For example:
    /// `projects/PROJECT_ID/locations/LOCATION_ID/jobs/JOB_ID`.
    #[prost(string, tag = "1")]
    pub name: ::prost::alloc::string::String,
}
/// Generated client implementations.
pub mod cloud_scheduler_client {
    #![allow(unused_variables, dead_code, missing_docs, clippy::let_unit_value)]
    use tonic::codegen::*;
    use tonic::codegen::http::Uri;
    /// The Cloud Scheduler API allows external entities to reliably
    /// schedule asynchronous jobs.
    #[derive(Debug, Clone)]
    pub struct CloudSchedulerClient<T> {
        inner: tonic::client::Grpc<T>,
    }
    impl<T> CloudSchedulerClient<T>
    where
        T: tonic::client::GrpcService<tonic::body::BoxBody>,
        T::Error: Into<StdError>,
        T::ResponseBody: Body<Data = Bytes> + std::marker::Send + 'static,
        <T::ResponseBody as Body>::Error: Into<StdError> + std::marker::Send,
    {
        pub fn new(inner: T) -> Self {
            let inner = tonic::client::Grpc::new(inner);
            Self { inner }
        }
        pub fn with_origin(inner: T, origin: Uri) -> Self {
            let inner = tonic::client::Grpc::with_origin(inner, origin);
            Self { inner }
        }
        pub fn with_interceptor<F>(
            inner: T,
            interceptor: F,
        ) -> CloudSchedulerClient<InterceptedService<T, F>>
        where
            F: tonic::service::Interceptor,
            T::ResponseBody: Default,
            T: tonic::codegen::Service<
                http::Request<tonic::body::BoxBody>,
                Response = http::Response<
                    <T as tonic::client::GrpcService<tonic::body::BoxBody>>::ResponseBody,
                >,
            >,
            <T as tonic::codegen::Service<
                http::Request<tonic::body::BoxBody>,
            >>::Error: Into<StdError> + std::marker::Send + std::marker::Sync,
        {
            CloudSchedulerClient::new(InterceptedService::new(inner, interceptor))
        }
        /// Compress requests with the given encoding.
        ///
        /// This requires the server to support it otherwise it might respond with an
        /// error.
        #[must_use]
        pub fn send_compressed(mut self, encoding: CompressionEncoding) -> Self {
            self.inner = self.inner.send_compressed(encoding);
            self
        }
        /// Enable decompressing responses.
        #[must_use]
        pub fn accept_compressed(mut self, encoding: CompressionEncoding) -> Self {
            self.inner = self.inner.accept_compressed(encoding);
            self
        }
        /// Limits the maximum size of a decoded message.
        ///
        /// Default: `4MB`
        #[must_use]
        pub fn max_decoding_message_size(mut self, limit: usize) -> Self {
            self.inner = self.inner.max_decoding_message_size(limit);
            self
        }
        /// Limits the maximum size of an encoded message.
        ///
        /// Default: `usize::MAX`
        #[must_use]
        pub fn max_encoding_message_size(mut self, limit: usize) -> Self {
            self.inner = self.inner.max_encoding_message_size(limit);
            self
        }
        /// Lists jobs.
        pub async fn list_jobs(
            &mut self,
            request: impl tonic::IntoRequest<super::ListJobsRequest>,
        ) -> std::result::Result<
            tonic::Response<super::ListJobsResponse>,
            tonic::Status,
        > {
            self.inner
                .ready()
                .await
                .map_err(|e| {
                    tonic::Status::new(
                        tonic::Code::Unknown,
                        format!("Service was not ready: {}", e.into()),
                    )
                })?;
            let codec = tonic::codec::ProstCodec::default();
            let path = http::uri::PathAndQuery::from_static(
                "/google.cloud.scheduler.v1.CloudScheduler/ListJobs",
            );
            let mut req = request.into_request();
            req.extensions_mut()
                .insert(
                    GrpcMethod::new(
                        "google.cloud.scheduler.v1.CloudScheduler",
                        "ListJobs",
                    ),
                );
            self.inner.unary(req, path, codec).await
        }
        /// Gets a job.
        pub async fn get_job(
            &mut self,
            request: impl tonic::IntoRequest<super::GetJobRequest>,
        ) -> std::result::Result<tonic::Response<super::Job>, tonic::Status> {
            self.inner
                .ready()
                .await
                .map_err(|e| {
                    tonic::Status::new(
                        tonic::Code::Unknown,
                        format!("Service was not ready: {}", e.into()),
                    )
                })?;
            let codec = tonic::codec::ProstCodec::default();
            let path = http::uri::PathAndQuery::from_static(
                "/google.cloud.scheduler.v1.CloudScheduler/GetJob",
            );
            let mut req = request.into_request();
            req.extensions_mut()
                .insert(
                    GrpcMethod::new("google.cloud.scheduler.v1.CloudScheduler", "GetJob"),
                );
            self.inner.unary(req, path, codec).await
        }
        /// Creates a job.
        pub async fn create_job(
            &mut self,
            request: impl tonic::IntoRequest<super::CreateJobRequest>,
        ) -> std::result::Result<tonic::Response<super::Job>, tonic::Status> {
            self.inner
                .ready()
                .await
                .map_err(|e| {
                    tonic::Status::new(
                        tonic::Code::Unknown,
                        format!("Service was not ready: {}", e.into()),
                    )
                })?;
            let codec = tonic::codec::ProstCodec::default();
            let path = http::uri::PathAndQuery::from_static(
                "/google.cloud.scheduler.v1.CloudScheduler/CreateJob",
            );
            let mut req = request.into_request();
            req.extensions_mut()
                .insert(
                    GrpcMethod::new(
                        "google.cloud.scheduler.v1.CloudScheduler",
                        "CreateJob",
                    ),
                );
            self.inner.unary(req, path, codec).await
        }
        /// Updates a job.
        ///
        /// If successful, the updated [Job][google.cloud.scheduler.v1.Job] is
        /// returned. If the job does not exist, `NOT_FOUND` is returned.
        ///
        /// If UpdateJob does not successfully return, it is possible for the
        /// job to be in an
        /// [Job.State.UPDATE_FAILED][google.cloud.scheduler.v1.Job.State.UPDATE_FAILED]
        /// state. A job in this state may not be executed. If this happens, retry the
        /// UpdateJob request until a successful response is received.
        pub async fn update_job(
            &mut self,
            request: impl tonic::IntoRequest<super::UpdateJobRequest>,
        ) -> std::result::Result<tonic::Response<super::Job>, tonic::Status> {
            self.inner
                .ready()
                .await
                .map_err(|e| {
                    tonic::Status::new(
                        tonic::Code::Unknown,
                        format!("Service was not ready: {}", e.into()),
                    )
                })?;
            let codec = tonic::codec::ProstCodec::default();
            let path = http::uri::PathAndQuery::from_static(
                "/google.cloud.scheduler.v1.CloudScheduler/UpdateJob",
            );
            let mut req = request.into_request();
            req.extensions_mut()
                .insert(
                    GrpcMethod::new(
                        "google.cloud.scheduler.v1.CloudScheduler",
                        "UpdateJob",
                    ),
                );
            self.inner.unary(req, path, codec).await
        }
        /// Deletes a job.
        pub async fn delete_job(
            &mut self,
            request: impl tonic::IntoRequest<super::DeleteJobRequest>,
        ) -> std::result::Result<tonic::Response<()>, tonic::Status> {
            self.inner
                .ready()
                .await
                .map_err(|e| {
                    tonic::Status::new(
                        tonic::Code::Unknown,
                        format!("Service was not ready: {}", e.into()),
                    )
                })?;
            let codec = tonic::codec::ProstCodec::default();
            let path = http::uri::PathAndQuery::from_static(
                "/google.cloud.scheduler.v1.CloudScheduler/DeleteJob",
            );
            let mut req = request.into_request();
            req.extensions_mut()
                .insert(
                    GrpcMethod::new(
                        "google.cloud.scheduler.v1.CloudScheduler",
                        "DeleteJob",
                    ),
                );
            self.inner.unary(req, path, codec).await
        }
        /// Pauses a job.
        ///
        /// If a job is paused then the system will stop executing the job
        /// until it is re-enabled via
        /// [ResumeJob][google.cloud.scheduler.v1.CloudScheduler.ResumeJob]. The state
        /// of the job is stored in [state][google.cloud.scheduler.v1.Job.state]; if
        /// paused it will be set to
        /// [Job.State.PAUSED][google.cloud.scheduler.v1.Job.State.PAUSED]. A job must
        /// be in [Job.State.ENABLED][google.cloud.scheduler.v1.Job.State.ENABLED] to
        /// be paused.
        pub async fn pause_job(
            &mut self,
            request: impl tonic::IntoRequest<super::PauseJobRequest>,
        ) -> std::result::Result<tonic::Response<super::Job>, tonic::Status> {
            self.inner
                .ready()
                .await
                .map_err(|e| {
                    tonic::Status::new(
                        tonic::Code::Unknown,
                        format!("Service was not ready: {}", e.into()),
                    )
                })?;
            let codec = tonic::codec::ProstCodec::default();
            let path = http::uri::PathAndQuery::from_static(
                "/google.cloud.scheduler.v1.CloudScheduler/PauseJob",
            );
            let mut req = request.into_request();
            req.extensions_mut()
                .insert(
                    GrpcMethod::new(
                        "google.cloud.scheduler.v1.CloudScheduler",
                        "PauseJob",
                    ),
                );
            self.inner.unary(req, path, codec).await
        }
        /// Resume a job.
        ///
        /// This method reenables a job after it has been
        /// [Job.State.PAUSED][google.cloud.scheduler.v1.Job.State.PAUSED]. The state
        /// of a job is stored in [Job.state][google.cloud.scheduler.v1.Job.state];
        /// after calling this method it will be set to
        /// [Job.State.ENABLED][google.cloud.scheduler.v1.Job.State.ENABLED]. A job
        /// must be in [Job.State.PAUSED][google.cloud.scheduler.v1.Job.State.PAUSED]
        /// to be resumed.
        pub async fn resume_job(
            &mut self,
            request: impl tonic::IntoRequest<super::ResumeJobRequest>,
        ) -> std::result::Result<tonic::Response<super::Job>, tonic::Status> {
            self.inner
                .ready()
                .await
                .map_err(|e| {
                    tonic::Status::new(
                        tonic::Code::Unknown,
                        format!("Service was not ready: {}", e.into()),
                    )
                })?;
            let codec = tonic::codec::ProstCodec::default();
            let path = http::uri::PathAndQuery::from_static(
                "/google.cloud.scheduler.v1.CloudScheduler/ResumeJob",
            );
            let mut req = request.into_request();
            req.extensions_mut()
                .insert(
                    GrpcMethod::new(
                        "google.cloud.scheduler.v1.CloudScheduler",
                        "ResumeJob",
                    ),
                );
            self.inner.unary(req, path, codec).await
        }
        /// Forces a job to run now.
        ///
        /// When this method is called, Cloud Scheduler will dispatch the job, even
        /// if the job is already running.
        pub async fn run_job(
            &mut self,
            request: impl tonic::IntoRequest<super::RunJobRequest>,
        ) -> std::result::Result<tonic::Response<super::Job>, tonic::Status> {
            self.inner
                .ready()
                .await
                .map_err(|e| {
                    tonic::Status::new(
                        tonic::Code::Unknown,
                        format!("Service was not ready: {}", e.into()),
                    )
                })?;
            let codec = tonic::codec::ProstCodec::default();
            let path = http::uri::PathAndQuery::from_static(
                "/google.cloud.scheduler.v1.CloudScheduler/RunJob",
            );
            let mut req = request.into_request();
            req.extensions_mut()
                .insert(
                    GrpcMethod::new("google.cloud.scheduler.v1.CloudScheduler", "RunJob"),
                );
            self.inner.unary(req, path, codec).await
        }
    }
}